Hello! Welcome to Hitfar Induction Heating Machine!Email to admin@hitfarltd.com
Contact Us
Service Hotline
+86-137-90228018
Add:Weiye Road No.16, Lianhu Industrial Zone, Tangxia, Dongguan,Guangdong,China
Medium frequency forging heating furnace with automatic feeding device
Author:admin Date:2018-09-26
Medium frequency forging heating furnace with automatic feeding device
 
The medium frequency forging furnace is applied to the continuous heat transfer of regular round bars, square materials or other shape hair defects such as steel, stainless steel, copper and aluminum above Φ12; it can be used for the whole heating of materials, and can also be used for local heating of end materials. Such as end heating, heating in the middle part, etc. Including medium frequency power supply, compensation capacitor box and workbench, induction coil, feeding mechanism, etc. According to different application requirements, it may also include infrared thermometer, temperature controller and feeding, coiling and other devices;
structure of mf induction heating forging furnace

Technical Parameters:
MODEL NO POWER HEATING CAPACITY OF  STEEL TO 1050℃ HEATING CAPACITY OF  COPPER TO 700℃(PER MIN) DIMENSION WEIGHT
ZG-MFF35 35KW 1.25KG 1.75KG 1200×600×6800 123KG
ZG-MFF45 45KW 1.67KG 2.33KG  135KG
ZG-MFF70 70KW 2.5KG 3.5KG 1400×700×890 185KG
ZG-MFF90 90KW 3.3KG 4.6KG 210KG
ZG-MFF110 110KW 4.16KG 5.8KG 223KG
ZG-MFF160 160KW 5.7KG 8KG L1600×W700×H890 260KG
ZG-MFF240 240KW 8.5KG 12KG MF generator:
800×560×1800 280KG
 
ZG-MFF300 300KW 10.7KG 15KG MF generator:
800×560×1800 300KG
 
240kw if/mf induction heating forging machine
 Main application ranges of Medium frequency forging heating furnace with automatic feeding device
 1, main application: medium frequency forging furnace is applied to the continuous heat penetration of regular round bars, square materials or other shape hair defects such as steel, stainless steel, copper and aluminum above Φ12; it can be used for the whole heating of materials, and can also be used for local heating of materials, such as The end is heated, the middle part is heated, and the like.
2, typical application: basic composition of the intermediate frequency forging furnace:
IF/MF induction forging machine
Characteristics of medium frequency forging furnace:
(1) The frequency range is large, from 1KHZ to 20KHZ, and the appropriate frequency can be selected according to the diameter of the specific heated workpiece.
(2) When the medium frequency forging furnace is heated, the length of the induction coil is 500mm - 1 meter long, and at the same time, a plurality of materials are heated to ensure the effect of heat penetration;
(3) The intermediate frequency forging furnace adopts continuous heating mode, and the load inside the induction coil is relatively balanced, which overcomes the actual heating of the equipment caused by the huge load change when the single bar load increases from room temperature to 1100 ° C during the whole heating process. The huge change of power enables the actual power of the equipment to be guaranteed to be more than 85% of the rated power value during the entire continuous heating process, and the equipment can be effectively utilized.
(4) When heating non-ferrous metals such as copper and aluminum, by properly designing the induction coil and capacitor, the actual power of the equipment can also reach more than 85% of the maximum power, and the heating capacity of 3.5KG/KW•hour is achieved when heating copper.
(5) Compared with the thyristor intermediate frequency, it is not only small in size, but also easy to maintain, and can save 15-20% of electricity;

Hitfar Power Technology Co., Ltd.

Lianhu Industrial Zone, Tangxia,Dongguan, China

Technial Support:HITFAR INDUCTION